Lithium Hydroxide Monohydrate 56.5 %Max Technical GradeCLPCLithium Hydroxide Monohydrate 56.5% min Technical Grade Suitable for use in production of general lubricating grease formulations, dyestuffs and many other chemical applications.
Physical specification: Molecular weight:41.96Density
PRODUCT FEATURES
Lithium Hydroxide Monohydrate 56.5%Max Technical Grade
CLPC Lithium Hydroxide Monohydrate 56.5% min Technical Grade Suitable for use in production of general lubricating grease formulations, dyestuffs and many other chemical applications.
| Physical Specifications | ||
|---|---|---|
| Molecular weight: | 41.96 | |
| Density @ 20ºC: | 1.51 g/cm3 | |
| Standard heat of formation: | ||
| Standard heat of fusion: | -188.9 kcal/mole | |
| -0.867 kcal/mole | ||
| Specific heat @ 25ºC: | 0.453 cal/g/ºC | |
| Loses water of hydration: | 100-110ºC | |
| Appearance: | White Crystal | |
| Water solubility | ||
| Temperature (ºC) | Weight percent LiOH in saturated solution | |
| 0 (ºC): | 10.7 | |
| 20(ºC): | 10.9 | |
| 100(ºC): | 14.8 | |
| Particle size | ||
| < 30 Mesh: | 10% Max | |
| 30 Mesh - 80 Mesh: | 85% Min | |
| > 100 Mesh: | 10% Max | |
| Chemical Specification | ||
| Item | Type | Result |
| LiOH: | 56.5 | 57.02 min |
| CO2: | 0.35 | 0.16 max |
| Cl-: | 0.003 | 0.001 max |
| SO4: | 0.05 | 0.002 max |
| CaO: | 0.03 | 0.0012 max |
| Fe2O3: | 0.003 | 0.0001 max |
| NaOH: | 0.05 | 0.001 max |
| Insolubles: | 0.005 | <0.001 max |
| Typical bulk density: | Loose: | 0.9 g/cm3 |
| Tap: | 1.0 g/cm3 |
| Physical Properties | ||||
|---|---|---|---|---|
| Appearance | White Crystalline Free Flowing Power | |||
| Odor: | None | |||
| Chemical Formula | Li2co3 | |||
| Chemical Properties | ||||
| Specification | Type Value | Test Methods | ||
| Appearance | White Crystalline Free | |||
| Flowing Powder | Visual | |||
| Li2co3 | ≥99.90% | 99.95% | Titration | |
| Pb | ≤5 Ppm | ≤3 Ppm | Aas | |
| Cu | ≤2 Ppm | ≤1.5 Ppm | Icp | |
| So4 | ≤30 Ppm | ≤25 Ppm | Gb | |
| Cl- | ≤20 Ppm | ≤15 Ppm | Icp | |
| Fe | ≤2 Ppm | ≤1 Ppm | Titration | |
| Mg | ≤10 Ppm | ≤5 Ppm | Titration | |
| Ca | ≤25 Ppm | ≤20 Ppm | Titration | |
| K | ≤10 Ppm | ≤10 Ppm | Aas | |
| Si | ≤40 Ppm | ≤20 Ppm | Titration | |
| Na | ≤20 Ppm | ≤15 Ppm | Aas | |
| Al | ≤2 Ppm | ≤2 Ppm | Titration | |
| Mn | ≤5 Ppm | ≤3 Ppm | Titration | |
| D50 | 3-4 Μm | |||
| Specific Gravity | >0.3 G/Cm3 |
Storage
Keep container tightly closed. Keep the container in a cool, well-ventilated area. Air Sensitive Sensitive to light. Store in light resistant containers. should be stored indoors on pallets at normal temperatures. If stored according to recommendations, the maximum shelf life is three years.
Packaging
In 25 Kgs or 20 Kgs Kraft Paper Bag or 100Kgs Drum.
Remark
Used in battery electrolyte, used in pharmaceutical synthesis and catalytic chemistry.